|
FEEDING UNIT: •Continuous Feeding or Skip Feeding. •Lead edge feeder, sheet length can be adjusted. •Frequency adjusting of air flow and pressure to fit for different size or band paperboa心. •three-row brush device and dust removal blower to clean the paperboard surface. |
|
|
PRINTING UNIT: •Vacuum paperboard transfer.•Printing Precision士0.5mm •Rubber roll or doctor blade ink supplying system. •Automatic cleaning device. •Automatic re-position system after cleaning. •Each printing unit can equip with heating system. •Peristaltic pump for ink supplying, Diaphragm pump recycling. |
 |
|
SLOTTING UNIT: •Single shaft but two sets slotting blades; Internal tooth mechanism for Case height adjusting to prevent the oil pollute the paperboard. •Slotting base transverse moving device is adopted; lead screw coordinate with guide shaft makes the movements flexible and accurate. •Flexible angle cutting design, no need to change blades for different type. •Two sets pre-creasing devices. •Equipped with hand hole cutting mechanism. •Creasing wheel diameter is increased. |
|
|
DIE-CUTTING UNIT: •Quick die-cutting plate changing device(option). •Mechanical differential structure is applied for the adjustment of transverse register. The adjustment range is士50mm •Anvil blanket-leveling device to prolong the working life. Anvil roll speed can be adjusted to coordinate the die-cutting plate with the paperboard. •Speed compensation device is adopted, compensation range +-0.8% |
|
|
|
WHB 1224 |
WHB 1228 |
WHB 1628 |
|
Max.speed (pcs/min) |
300 |
250 |
160 |
|
Max.sheet size（mm） |
1200×2400 |
1200×2800 |
1600×2800 |
|
Min.Sheet size （mm） |
300×600 |
300×600 |
450×600 |
|
Max.Printing Area（mm） |
1200×2400 |
1200×2600 |
1600×2800 |
|
Standard sheet thickness（mm） |
7.2 |
7.2 |
7.2 |
0757-86683439 
