|
FEEEDING UNIT: •Continuous Feeding or Skip Feeding. •Lead edge feeder, sheet length can be adjusted. •Frequency adjusting of air flow and pressure to fit for different size or band paperboard. •three-row brush device and dust removal blower to clean the paperboard surface. |
|
|
PRINTING UNIT: •Roll to Roll paperboard transfer.•Quick口ate-hitching device for printing plate mounting and dismounting. •Printing Precision 1 0.5mm· •Rubber roll ink supplying system. •Doctor blade ink supplying system is option. •Automatic cleaning device. •Automatic re-position system after cleaning. •Fast moving feeding wheels. |
|
|
SLOTTING UNIT: •Single shaft but two sets slottingblades,lnternal tooth mechanism for Case height adjusting to prevent the oil pollute the paperboard. •Slotting base transverse moving device is adopted,lead screw coordinate with guide shaft makes the movements flexible and accurate. •Flexible angle cutting design, no need to change blades for different type paperboard. •Two sets pre-creasing devices. •Equipped with hand hole cutting mechanism. •Creasing wheel diameter is increased. |
|
|
DIE-CUTTING UNIT: •Quick die-cutting plate changingdevice(option). •Mechanical differential structure is applied for the adjustment of transverse register. The adjustment range is土50mm •Anvil blanket-leveling device to prolong the working life,Anvil roll speed can be adjusted to coordinate the die- cutting plate with the paperboard. •Speed compensation device is adopted, compensation range+-0.8%. |
|
|
|
WPD920 |
WPD1224 |
WPD1228 |
WPD1628 |
WPD1632 |
WPD2540 |
|
|
Max.speed(pcs/min) |
300 |
250 |
230 |
180 |
160 |
100 |
|
|
Max.sheetsize（mm） |
900×2000 |
1200×2400 |
1200×2800 |
1600×2800 |
1600×3200 |
2500×4000 |
|
|
Min.Sheet size（mm） |
250×500 |
300×600 |
300×600 |
450×600 |
450×600 |
450×600 |
|
|
Max.Printing Area（mm） |
880×2000 |
1200×2400 |
1200×2800 |
1600×2800 |
1600×3200 |
2450×4000 |
|
|
Standard shee（mm） |
7.2 |
7.2 |
7.2 |
7.2 |
7.2 |
7.2 |
|
|
Min.Slotting |
Normal knife（mm） |
110×110×110×110 |
120×120×120×120 |
120×120×120×120 |
130×130×130×130 |
130×130×130×130 |
130×130×130×130 |
|
Distance |
Reverse knife（mm） |
220×65×220×65 |
230×65×230×65 |
220×65×220×65 |
230×65×230×65 |
230×65×230×65 |
230×65×230×65 |
|
Max.Slotting depth（mm） |
260 |
300 |
300 |
400 |
400 |
400 |
|
0757-86683439 
